Error processing SSI file
Catalog Request


PC(ISA-Bus) RESOLVER DECODER BusMODULE
BRING MACHINE CONTROL FUNCTIONS TO YOUR IBM PC, OR EQUIVALENT

  • 8-bit ISA bus interface
  • Cradle covers 2 ISA slots
  • Protocol for ISA bus-to-cradle communications
    emulates PGI-to-cradle protocol
  • Cradle supports 2 C-bus slot connections (function
    module and I/O card)
  • All function and I/O module field connections are
    via 37-pin female sub D connector

 

 


With the increasing use of industrial PCs (IPCs) for machine control, has come a need for PLS, resolver decoder, shut height, die protection, and tonnage functions. Now, AVG Automation brings these functions to the industrial IBM PC (or equivalent) platform. Covering 2 ISA slots in width, users can now take advantage of these proven technologies on their IPCs.

AVG Automation's C-Bus is a series of function and output modules. This offers the user flexibility by allowing them to customize their plug-in cards by mixing and matching the function module and output module to meet their application's unique requirements.
Resolver Decoder:

A resolver decoder is an analog-to-digital (A/D) converter that converts the resolver signals corresponding to shaft position into digital data. AVG Automation's resolver decoders use Ratiometric decoding.

Resolver Decoder features include:

  • Fully absolute position; no loss of position under any condition
  • Programmable resolution:
    --Single-turn:  20-1024 counts-per-turn
    --Multi-turn:  0-127 (coarse) and 0-1023 (fine) counts-
      per-turn
  • Programmable motion detector (under/over speed switch)
  • Fully isolated I/O
  • Full scale electronic offset for easy machine setup
  • Broken resolver wire detection
  • Hardware-based microprocessor monitoring

PC(ISA-Bus) RESOLVER DECODER SPECIFICATIONS

ISA bus Interface:  8 bit, 4k byte window at a switch selectable
     address between A0000 to FF000
ISA slots:  2
Connections:  All function and 1/0 module field connections are
     through a 37-pin female sub D connector
Dimensions:  <13.345" (338.96 mm) long and <4.2" (106.68 mm) 
     high
Resolution:  10-bit,single-turn resolver decoder (fully absolute)

Error processing SSI file