Input Power:
     AC: 105-135Vor210-270V,50/60Hz,5W 
     DC: 8 -30 VDC @ 0.25 A, exclusive of load (without
     using optical isolation, an external power supply is
     needed only for PNP outputs)  
Operating Temperature:  -10°F to +130°F (-2°C to +55°C) Position Transducer:  AVG Automation's RL1 00, E7R,
     E8R, or RL101 single-turn resolvers. 
Maximum Cable Length between Resolver and DMS:
     2500 ft (762 m), shielded twisted-pair 
Output Format and Resolution:  
     BCD: 360, 1000, or 3600 counts-per-turn 
     Natural Binary: 1000, 1024,3600 or 4096 counts-per-turn
     Gray code: 256,360,512,1000,1024,3600, or 4096
     counts-per-turn 
Resolver shaft speed: 3600 RPM (max.) 
Resolver-to-digital decoder tracking speed: 1800 RPM Display: 3 or 4 digits, 0.25" (6.35 mm) LEDs 
PLC Sync. Input: (option) 
     Positive-edge: (LOW to HIGH) and 
     Negative-edge: (HIGH to LOW) triggered. 
     (See Input Logic for Voltage and Current specification:) PC-handshake strobe: 30 ps minimum width 
Strobe Delay to Latch Data: 100 ps 
Transparent Mode/Microfreeze (Standard): 
     Output data is continuously updated at full speed. The
     data is latched for 100 ± 10 14s within 30,us of a
     transition (HIGH to LOW or LOW to HIGH) at data
     transfer input.

Optical Isolation (Optional): 2500 Volts, on all I/Os except
     resolver

Input Logic (Channel Select, PLC Sync):
28 VDC Max:
     P-type:
     Logic FALSE: 0 to 0.8V @ 4 mA;
     Logic TRUE: 2.4 V @ 3.2 mA
     N-type:
     Logic FALSE: 3.8 V @ 0.4 mA;
     Logic TRUE: 0 to 0.8 V @ 3.2 mA
     C-type:
     Logic FALSE: 0 to 0.8 V @ 3.2 mA;
     Logic TRUE: 3.8 V @ 0.4 mA
0 to 5 VDC Logic:
     T-type:
     Logic FALSE: 0 to 0.8 V @ 3.2mA;
     Logic TRUE: 2.4 V @ 0.4 mA

Channel Select Timing:
Input Multiplexing: 100 ms from channel select
Output Multiplexing: 15 ps from channel select