ELECTRICAL:
     To maintain optical isolation between Remote In and
     Remote Out, use two different sources for VS, and VS2.
Customer Supplied Power Input (VS1):
     Voltage range:  10-30 VDC
     Input current (max.):  450 mA
InterBus Remote In Power (VS2):
     Voltage range: V10-30 VDC
     Input current (max.):  100 mA
Connectors (on rear):
     InterBus Remote In:  9-pin male connector
     InterBus Remote Out:  9-pin female connector
     24 VDC input power:  6-pin male connector

MECHANICAL:
Housing size:  Size 40--4.0" (101.6 mm) dia.
Max. Starting Torque:
     8 oz-in @ 77º
     (576 gm-cm @ 25ºC)
Moment of Inertia (gM/CM2):  45
Max. Slew Speed (rpm):  5,000
Shaft size:  5/8" (15.88 mm)

Max. Shaft Loading:
     Axial:  50 lb. (22.68 kg)
     Radial:  100 lb. (45.36 kg) 
Bearing life at Max. Mfr. Spec. (Rev.):  2 x 109 
Approx. Weight:  6 lb. (2.72 kg)

ENVIRONMENTAL:
Shock:  200 g for 11 msec 
Vibration:  20 g to 2,000 Hz 
Operating Temperature:
     32 ºF to 140ºF (OºC to 60ºC) 
Storage Temperature:
     -40ºF to + 185ºF (-40ºC to +85ºC) 
Enclosure:  NEMA 13

INTERBUS INTERFACE:
InterBus Remote In and InterBus Remote Out 9-pin connectors
Interface Type:  Remote bus
Direction of increasing counts:  CW/CCW, DIP switch selectable
Resolver Data Format:  Gray Code
Data Frame:  32-bit (lower 17-bits for position)