Autotech Controls - Highest Functionality per Cubic Inch

		Call 1-800-832-3647
	Innovation by Design Advanced Press Automation Products

►Position Feedback/Controls Devices
Resolvers, Decoders, PLS, Touch PLS, Motion Detectors, Resolver based Encoders

►Advanced Press Automation Products
Die-Protection, PLS, Brake, Shut-Height
and Tonnage Monitor

►Next Generation Smart Encoders
Field Programmable
All-in-One, Network Capable

Resolver based ShutHeight Monitor
» Shut-Height indication, 0.001” accuracy » Prescalable, Presettable » Automatic calculation of scale factor » Simple front panel programming » Built-in self Diagnostics » Programmable Drift/Over travel Monitor » Two Programmable limit outputs for Over & Under travel, included

M1150-M10 Series Digital Shut-Height Monitor for just $995, + Resolver
Resolver based Shut-Height Monitor
The M1150-M10 Series Shut-Height Monitor from Autotech is the most cost effective as well as most rugged Shut-Height monitoring system. Press Shut-Height can be measured either with a resolver coupled to the Shut-Height motor or with a linear position measuring ultrasonic rod. Resolver system has proven to be the most reliable Shut-height monitoring system used by the most automated and sophisticated press room. In addition, M1150-M10 has high-end advanced functionality such as shut-height drift monitoring.Hot Keys make programming as well as accessing of information very easy for operator Multiple Setup Storage
Precise Shut Height Indication	Drift Monitoring
The M1150-M10 measures shut-height to an accuracy of 4096 counts per turn of the resolver connected to the shut-height motor, thus providing accuracy of better than 0.001”	Shut-height can drift over a period of time. This unique feature from Autotech generates an alarm output if shut-height falls out of a preset programmed range.
Easy Calibration	Absolute Position
The M1150-M10 scales decoded position into user friendly engineering units. The calibration of unit is extremely simple and does not require any computations. All users have to do is to move ram to two distinct positions and enter the Shut Height corresponding to those positions.The unit computes scaling parameters automatically.	The M1150-M10 shut-height monitor, unlike incremental encoder systems, is absolute. Because of the absolute nature of the resolver, the position is retained even during power loss. In addition, it is highly immune to electrical noise interference.
Upper and Lower Travel Limits	Self-Diagnostics & Broken Resolver Cable
M1150-M10 has a provision for monitoring upper and lower shut-height limits. Alarm will be generated if an operator tries to set shut-height outside his programmed range.	The M1150-M10 constantly monitors internal circuitry and resolver. In case a fault occurs or resolver cable is broken, the unit goes into a Fault mode and activate alarm outputs to provide fail-safe operation.

The Most Versatile Small Footprint Resolver-to-Digital Shut-Height Monitor

The M1150-M10 is a multi-turn programmable Shut-Height Monitor. It takes the input from a single turn resolver like Autotech’s series E7R or RL100 which is coupled to the shaft of the shut-height motor. The M1150-M10 decodes the resolver signals using highly noise immune ratiometric decoding technique, scales the digital data based on the programmed scale factor and displays it on the front panel. The position information is continuously compared to two programmable preset limits and the outputs are activated when limit conditions are satisfied. All outputs of the M1150-M10 are optically isolated and the resolver inputs are differential, ensuring extremely reliable operation of the unit even in the harshest of industrial conditions.

The M1150-M10 will decode the shaft angle to 1/4096th of a revolution (12 bits) and keep track of multiple revolutions. The ShutHeight Monitor also features tachometer and motion detector, fractional scaling, preprogrammed preset value with an external trigger, full decimal point control and 2 channels of position based alarm outputs.

Prescalable, Presettable; Yet Absolute
A wide range of easy to set programmable scale factors (0.3 - 4095.999) eliminates the need of mechanical gear trains and prescales the display to readout directly in engineering units. Any preset number can be jammed into the position “counter” by an external signal, thus “offsetting” or “re-zeroing” the machine in no time. As described earlier scale factor can be automatically calculated for easy calibration of the M1150-M10 shut-height monitor.

Simple Front Panel Programming
The M1150-M10 is fully front panel programmable for all variables and yet secure against any unauthorized program
changes. Opening of an external user-provided keyswitch inhibits any program changes on the front panel.

No Batteries, Nonvolatile Memory
Nonvolatile EEROM memory retains information indefinitely after power loss or machine shutdown, eliminating batteries and related hazards.

Reliable Under Extreme Environments
The M1150-M10 combines the ruggedness of a brushless resolver and reliability of a solid-state control. The resolver can be mounted on a machine shaft in any hostile environments such as mechanical shock, vibrations, extreme humidity and temperature changes, oil mists, coolants, solvents, etc., and the programmable unit M1150-M10 can be mounted up to 2500 feet away in control panel.

Home | About Us | Order Catalog | Support | Downloads
Copyright © 2014 Autotech Controls. All rights reserved. All Product names, trademarks and registered trademarks are the property of their respective manufacturers or legal holders. Autotech Controls disclaims any proprietary interest in the marks or names of others. All prices are US List prices and are subject to change without notice.