1-800-TEC-ENGR
1-800-832-3647
Innovation by Design
Advanced Press Automation Products
►Position Feedback/Controls Devices
Resolvers, Decoders, PLS, Touch PLS, Motion Detectors, Resolver based Encoders		 ►Advanced Press Automation Products
Die-Protection, PLS, Brake, Shut-Height
and Tonnage Monitor 		►Next Generation Smart Encoders
Field Programmable
All-in-One, Network Capable
Intuitive, Simple to Program without PC or Software, Shows Position /RPM on 4-digit LED Display

 


• A15, A25, A40 Smart EncoderTM

• Robust, NEMA 4, Class I, DIV II,
Conformal Coated boards, Aluminum
or Stainless Steel Housing

• Size 25 Drop-in-Replacement for BEI/Dynapar
Order your
FREE Hand Book
All you ever wanted to know about encoders and how to properly interface with Automation Controllers
Catalog Request
Jewel of an Encoder
World’s Smallest NEMA4, Heavy Duty Encoder
Servo or Face mount NEMA 4/4X Hosedown construct Stainless steel model
15 lb. Axial/Radial shaft


1/4” SS Shaft
10-30VDC Power ET7272 Line drive outputs short circuit proof
2 Single row bearings
with shaft seal
NEMA 4 cable fitting
Up to 720 count/rev resolution
 

Electrical Specifications:
Input power voltage: 10VDC - 30VDC
Input power current: 100mA exclusive of load
Reverse voltage protection: YES
Encoder Output Signals:
Max. voltage 30VDC, max. current/output: 40mA
Line driver device: ET7272
“N” model: Sinking side of ET7272, no pull-up needed
High voltage: Vcc -0.5V @20mA source current
Low voltage: 0.5V @ 20mA sink current

Temperature Specifications:
Operating: -10°C - 70°C
Storage: -40°C - 85°C

Home | About Us | Order Catalog | Support | Downloads

Copyright © 2014 Autotech Controls. All rights reserved. All Product names, trademarks and registered trademarks are the property of their respective manufacturers or legal holders. Autotech Controls disclaims any proprietary interest in the marks or names of others. All prices are US List prices and are subject to change without notice.