DM7

Programmable Resolver Decoder Model DM7
DM7-x1x2x3 00-010	Basic unit resolver-to-digital decoder, programmable output format (gray code, BCD, binary) and resolution (21-4096 counts-per-turn)
DM7-0 x2 x3 00-14B	Above with 14 bit (21-16,384 counts per turn) resolution. (Must use higher accuracy resolvers)
x1 = Type of Unit:
0:	Basic unit with AC power input—Must select "1" or "2" for input power below
A:	(Available with only DC power input) Must select "0" for input power below; programmable analog position/tach output; programmable voltage/current output. (Not available on DM7-0X2X300-14B)
x2 = Input Power:
	If you selected "A" above, select "0" here If you selected "0" above, select "1" or "2" here.
0:	DC Power input, 12/24 VDC (not available on DM7-0xx00-14B)
1:	120V AC, 60Hz
2:	220/240V AC, 50Hz
x3 = Input Power:
T:	TTL, 5 V logic with multiplexing
P:	PNP (sourcing) transistor, 100 mA max. @ 50 V max., high Logic TRUE
N:	NPN (sinking) transistor, l00 mA max. @ 50 V max, low Logic TRUE
C:	NPN (sinking) transistor, l00 mA max. @ 50 V max, high Logic TRUE
Slave Unit
For slave DM7, change M in "DM7" to S
NEMA 4 Cover & Back Panel Mounting Brackets
MBZ-M1150-NEMA4	NEMA 4 cover for DM7
MBK-M1150-011	Back panel mount bracket (2 brackets)
Cables
CBL-25S22-Dxxx	Cable for digital output wiring with overall foil shield and 25-pin sub D connector on one end, where xxx = Standard Length in feet, 010, 020, 050 ft, and in increments of 50 ft, e.g., 100, 150, 200 ft, etc.
ECM-25PIN-M11	25-pin sub D male connector (mates with the connector on DM7).