M1890
| M1890
Programmable Position Transducer and Selsyn Indicator
|
||
| SAC-M1890 - x1 x2 x3 x4 x5 | Programmable Position Transducer
|
|
| x1 = Version:
|
|
|
| R: | Programmable Position Transducer | |
| S: | Programmable Selsyn Indicator | |
| D: | Remote Display Only (must select “3” in option x2 below) | |
| x2 = Serial Option:
|
||
| 1: | No Serial Option | |
| 2: | Serial Output RS-422A port (not available for M1890-Dxxxx) | |
| 3: | Serial Output RS-422A port (not available for M1890-Dxxxx) | |
| x3 = Parallel Output Option:
|
||
| 0: | No Parallel Option
|
|
| P: | PNP Source transistor | |
| N: | NPN Sink transistor (Low Logic TRUE)
|
|
| C: | NPN Sink transistor (High Logic TRUE) | |
| T: | TTL with multiplexing | |
|
|
||
| 0: | No Parallel Option | |
| D: | Parallel Output, BCD format
|
|
| B: | Parallel Output, Natural Binary
|
|
| G: | Parallel Output, Gray code | |
| x5 = Other Options: | ||
| 0: | None | |
| T: | Tach Option | |
| Position
Transducers
|
||
| The M1890 requires a single-turn resolver or Selsyn as an input device, such as AVG Automation's RL100, E7R, E8R, or E9R series of resolvers. Please see “How to Order" information on position transducers and appropriate accessories, such as interconnect cables, mounting brackets, couplings, etc. | ||
| Cables | ||
| Where xxx = number of feet; 010, 025, 050, or in increments of 50 ft., e.g., 100, 150, 200 ft, etc. | ||
| CBL-10T22-DBxxx | With 25-pin Sub D Connector on one end only, for RS-232C serial output
|
|
| CBL-10T22-DCxxx | With 37-pin Sub D Connector on one end only, for RS-422A serial output
|
|
| CBL-29S22-DBxxx | With 25-pin Sub D Connector on one end only, for Parallel output
|
|
| Connectors | ||
| ECM-25PIN-M11 | 25-Pin Sub D Male connector | |
| ECM-37PIN-M11 | 37-Pin sub D male connector | |
| Accessories | ||
| Single-Preset Limit Modules for M1890 Series: | ||
| SAC-1855L-F x1 Ox2 | 51/2-Digit, Single-Preset Limit Modules | |
| x1 = Limit Setting | ||
| E: | External Limit Setting | |
| T: | Front-panel Thumbwheel Setting | |
| x2 = Limit Setting | ||
| T: | 100 mA Open-collector Transistor | |
| R: | 10 A, DPDT Relay | |
| A: | 3 A, AC Solid-State Relay | |
| D: | 2 A, DC Solid-State Relay | |
| Interconnect cable for 1855L Modules: | ||
| CBL-E34MF-09M | 34-Conductor, Master Male/Female Ribbon Cable, End-to-End Connectors @ 9" (228.6 mm) | |
| CBL-E34MF-09S | 34-Conductor, Slave Male/Female Ribbon Cable, End-to-End Connectors @ 9" (228.6 mm) | |
| CBL-E34MF-Txx | 34-Conductor Transition Connector for Ribbon Cable to Screw Terminals (use for mating to other cable types) where xx = Distance in inches between Ribbon Conductors and Screw Terminal | |
| CBL-29S22-Mxxx | 29-Conductor, twenty-seven 22 AWG, two 12 AWG, and overall foil shield in increments of 50 ft., e.g., 100, 150, 200 ft, etc. w/30-pin MS Connector on one end; where xxx = length in feet; 010, 025, 050, or |
|